Automobiles & Vehicles Deals recommendations and related topics
Brake Fluid:
The brake system uses a glycol-based hydraulic fluid. The fluid is "hygroscopic," which means it tends to absorb moisture over time (never leave a can of brake fluid open for this reason). Moisture lowers the boiling point of the fluid and causes internal corrosion in the brake system. That?s why the fluid should be replaced when brake repairs are made or every two years for preventive maintenance. There are several different types, based on the boiling temperature and other characteristics of the fluid. DOT 3 or DOT 4 is used in most passenger cars and light trucks. Use only the type of fluid specified by the vehicle manufacturer. Using DOT 3 in an application that calls for DOT 4 might create a safety hazard. DOT 5 brake fluid is different from DOT 3 and DOT 4 in that it is silicone-based. DOT 5 is NOT recommended for any vehicle equipped with antilock brakes - but it can provide long-lasting protection against corrosion for vehicles that are stored for long periods of time or are driven in wet environments.Brake Squeal :
The annoying high-pitched screech that's sometimes heard when braking. A common ailment on many disc brake-equipped cars, it is caused by vibration between the brake pad and rotor. It causes no harm, but metallic scraping sounds should be investigated because it usually means the brake linings are worn down to their metal backing plates. If not replaced, the metal-to-metal contact can ruin the rotors or drums. Brake squeal can be eliminated by installing shims on the backs of brake pads, by applying anti-squeal compound or a moly-based brake grease never ordinary chassis grease) to the backs of the pads, and/or resurfacing the rotors. Applying a nondirectional swirl finish on the rotors can provided added noise suppression.
